Re: MD1000 Not detected
Hello AlainM, you will want to verify that OMSA is seeing storage on its end as Rob says. To do that in ESXi you will need to use OMSA from a server that is either Linux or Windows based, or install...
View ArticleEditing IP addresses in Discovery Ranges/Groups - how?
Is there a way to edit and/or delete IP address ranges in Groups or Ranges?The IP address section is greyed out, and I have to delete and reenter the rangeif I need to change something.
View ArticleOME 1.1.1: RAC and Server not correlated for blade
Hi,I have one blade M915 (out of 32) where iDRAC6 and Server are not correlated.31 blades appear under RAC and Servers and are correlated.This last blade also appears under RAC and Server but is not...
View ArticleRe: OME 1.1.1: RAC and Server not correlated for blade
Beaver6675,In Device Summary section, for both the server and RAC, make sure the serviceTag is same. If not, they will not be correlated. Review "Logs -> Application Logs" immediately after the...
View ArticleSoftware Update Task Failed
Attempting my first firmware updates using OME and got a failed error:Results: Downloading Packages. Exception from HRESULT: 0x803380D9 Check the following: Credentials entered are valid, iDRAC is...
View ArticleRe: Editing IP addresses in Discovery Ranges/Groups - how?
Yeah, that's the way it works today. No edit on the ips in the range.Thanks!Rob
View ArticleRe: How do I see an MD1000 in OME?
So just to confirm:On 11G servers there is no way to see DAS storage through WSMan iDRAC discovery.The only way to see the DAS storage in OME is through the server IP via SNMP discovery after OMSA is...
View ArticleRe: Can't access Alert Action Informations
Hi there.Can you confirm what version of OpenManage Essentials you are using?thanks much,Rob
View ArticleRe: Import Server List as opposed to scanning range ?
Thanks for the post.The best we can do is to import a list of IP addresses that will then go on to be discovered and inventoried. So the import will create a discovery range to do this.There is no way...
View ArticleRe: Software Update Task Failed
Hi there...- Check if there is a firewall between the OME server and iDRAC- Port 1278 used for iDRAC to OME- Port 443 used for OME to iDRACCheck the jobs on the iDRAC using this command: (Check for...
View ArticleClik here to view.
Re: Software Update Task Failed
Also,We need to double check what is the iDRAC version. Is it greater than 3.35?Rob
View ArticleRe: Software Update Task Failed
Thanks Rob,It's at 1.92 which is the most up to date monolithic.
View ArticleRe: Software Update Task Failed
Are 1278 and 1279 new ports for 1.1.1?I don't remember them being required for 1.1.0.
View ArticleRe: OME 1.1.1: RAC and Server not correlated for blade
Thanks - I think that was it. After a service call reinserted the Service Tag, the RAC and Servers entries were correlated.
View ArticleRe: Trying to add two devices behind a public IP
Hi,You can provide IP address of that device in the first discovery task. In the next discovery task you can give a range. For example if you provide 192.160.10.2 in the first discovery task. You can...
View ArticleDell vmware management plugin
Hello. Do not know if this is the right forum but anyway.On of my hosts refuse to connect to the management plugin.Il get this error.Severity: CRITICALError Code: 267210Time (Appliance server time):...
View ArticleRe: Server is showing with web dns address in device instead of server name
Both names are in DNS. As I mentioned in my question, one is the Web address and the other is the actual server name. So does my other web servers. But other servers are showing up as the server name...
View ArticleRe: Dell vmware management plugin
Hi Mattias, thanks for the post. Mostly OME over here. But I'm hoping there are vm plugin folks in this other forum:en.community.dell.com/.../4469.aspxthx!Rob
View Article